It‘s too hot? It‘s too cold? Then use
SunFreeze Outdoor Housing 1500/300
Outdoor application for summer and winter
installations of LPS-Bax show lasers.
Go for the perfect temperature inside your
laser show system and opt for SunFreeze
1500/300.
Weather-proof housing with active 300 W
heater and 1.500 W cooling. With its
compressor-cooler and IP65 protection-class it
keeps the laser system inside always in an
adjustable temperature range between 20 -
30°C with an accuracy of 0.3°C. Independent
from the ambient temperature in a
temperature range of +5°C up to 40°C.
Including anti-reflex-coated glass window for
the laser output.
Measurements: 800 x 500 x 500 mm
with external chiller 580 x 290 x 470 mm.
PowerIN: 230V
For permanent outdoor installation there are
10 m hoses included (between chiller and IP65
housing), connection cable and interlock cable
(from chiller to IP65 housing) to interrupt the
laser system, in case of any chiller-fault.
Made in Germany
SunFreeze Outdoor Housing for LPS-Bax XS and
LPS-Bax S show laser - made in Germany
CONTACT
LPS-Lasersysteme
Mr. Siegmund Ruff / CEO
Haidschwaerze 18
72131 Ofterdingen /
Germany
Phone: +49 7473 27 11 77
s.ruff(at)lps-laser.de
MANUFACTURE IN GERMANY. Install. Rental. Dry Hire. Global. Since 1993
SunFreeze for Bax XS and Bax S
price on request
Page content does not constitute binding advice of any form. All information
without obligation and without warranty.
Prices are in EURO, ex factory, without VAT. Content without engagement.
We reserve changes that serve the technical progress.